Nylon cable ties are injection molded from UL approved nylon 66 cable ties with a fire resistance rating of 94V-2. They have good acid resistance, corrosion resistance, insulation, not easy to age and have a strong bearing capacity. As a best nylon cable tie manufacturer in China, our nylon cable ties can be used at an ambient temperature of minus 20 degrees to 85 degrees; and the standard colors are white and black, and other colors, such as red, yellow, blue, green and other colors are welcome to order, in addition, the size can also be customized. We main produce releasable and self locking nylon cable ties for buyers.
Common nylon cable ties specifications are 3x100 3x120 3x150 3x200 4x100 4x120 4x150 4x180 4x200 4x250 4x300 4x350 4x370 5x120 5x150 5x180 5x200 5x250 5x300 5x350, other specifications and models of nylon ties are accepted. Our cable ties widely used in electronics factories, wire processing factories, wire and cable, toy factories, festive festivals, stationery department stores, fresh supermarkets, residential daily use, electrical appliances, connectors and other items.
How to untie the nylon cable tie method steps?
1. Cable ties are easily available on the market and relatively cheap. The general material is plastic. Its style is shown in the figure. Observe first, one end is pointed, the other end is pierced, and one side has jagged lines.
2. When tying, you must first distinguish between pros and cons. Bend the jagged side inward, as shown in the figure. The pointed end passes through the serial port to form an enclosure.
3. At this time, you can bandage the things you need to organize. Just pull the pointed end with a hand to tighten it, and it will not loosen.
4. It's easier to tie, but it's more difficult to uncover. Most people don't know how to do it. Most people use scissors to cut it. This is what you need to prepare a small flat-blade screwdriver.
5. Observe the serial port carefully, you will find that there is a small anti-loosening port that jams the cable tie. This is why the cable tie will not loosen. We just need to use a small screwdriver to tighten the gap between the stop in the serial port and the cable tie, as shown in the figure. You can easily pull out the cable tie and uncover it. The tie can be reused again.